Seismic Fullspin Lite Classic Bearings

£18

Seismic Fullspin Lite Classic Bearings

£18

Seismic‘s new Fullspin bearing range are the result of a long process of redesigning, reassessing, and redeveloping their previous Tekton line to make the best possible bearings for all types of skateboarding.

These are the 7-Ball Lite Classics – the cheapest option in the Fullspin line, giving you Seismic’s top quality bearings on the tightest possible budget. They also come with a traditional removable spacer, meaning you can use them in uncored wheels and rollerskate wheels which take non-standard spacers.

Note that we do highly recommend you use the spacers. Bearings without spacers risk getting damaged and are likely to run considerably slower over time. Also, note that unlike other Fullspin bearings, classic Fullspins do not feature built-in speed washers, so make sure you keep the ones which come with your trucks!

In stock

SKU: BRNG_FLSPN_7B_LITE_CLA Category: Tags: , , Brand:

Full disclosure: what follows is Seismic‘s own text for these bearings. We’ve just copy and pasted it because… well… there’s a lot of text here. All we’ll add is that, yes, these bearings are bloody good.


7-Ball system – Best overall balance of speed and resistance to frequent impacts and side loads. Recommended for high-speed turning / sliding and all style / trick disciplines.

Premium Steel balls – Superior Grade G10 balls spin truer with less friction inside bearings.

Exceptionally tight, consistent assembly and raceway tolerances – Significantly less internal play, friction, wear, and noise. Superior speed, handling, and durability.

Extra-tough steel and thicker outer rings – Raceways hold strictest curvature and finest surface finish – and bearings stay tight and fast – for far longer. Thicker, 60%-stiffer outer rings resist flexing, spin truer and faster, and keep seals from popping off on extreme impacts. Coated with a strong rust-preventative agent, but more economically finished without the black oxide anti-corrosion surface treatment seen in premium Steel and Ceramic XT models.

State-of-the-art Classic spacing / alignment system – Fullspin spacers – precision-machined from premium bearing steel with smarter, stricter dimensional specs – have thicker walls that square up against matching extra-wide inner ring surfaces with superior precision and stability. System levels and steadies all working components of seated bearings better than Classic designs from any other brand, to unlock outstanding paired performance. Synergizes with all advanced features in individual bearings to maintain highly consistent wheel contact and grip; support more predictable slide performance; and extend both wheel and bearing life.

High-end lubricant – Formulated for peak performance under real-world skating stresses (not max free-spin time).

(Note: do not clean – or add extra lubricant to – brand new Fullspin bearings. Wipe grime off outer seals whenever excess builds up. Clean and re-lube bearings only as needed, depending on how often and where you skate – more frequently if you ride through water, mud, dirt, or sand. Do not remove outer seals or disassemble in any way; just soak in isopropyl alcohol and let dry. Avoid excessive cleaning, which increases risk of accidental damage to small internal components, as well as citrus-based cleaning solutions, which may cause corrosion.)

Labyrinth-style outer seals – Edges of seals slot inside V-shaped grooves for maximum resistance to dust and debris.

Next-level anti-contaminant ball retainers – Expanded outer diameter slots into groove in outer ring just like a second seal, to form a unique integral barrier against dirt and grime.

Additional information

Weight 110 g
Dimensions 10.7 × 2.4 × 2.4 cm
Suggested Use

, , , , , ,

Brand

Reviews

There are no reviews yet.

Be the first to review “Seismic Fullspin Lite Classic Bearings”

Your email address will not be published. Required fields are marked *