The Mode Deco is a slightly larger take on the traditional single kick freestyle board - perfect for folks who like classic 80s freestyle but don't want to bend over so far for pogo tricks!

As with all Mode Skateboards decks, this board has been personally hand-screened by Terry Synnott in Florida. Each one has been photographed by us, so what you see is exactly what you get - but these particular colourways might never be produced again, so grab your favourite while you still can.

Specifications:

Length: 29"
Width: 7.4"
Wheelbase: 13.5"
Nose: 5.5", flat.
Tail: 5.875" kicktail.

We recommend a nose skid for the nose of this deck and a Seismic tail skid for the tail.

Paris are largely known for their longboard trucks, but their "street" trucks are truly top-notch. Combining solid construction with a top-quality finish, these are definitely premium trucks.

These 108mm trucks are perfect for freestyle use; coming in taller than most trucks and with a big square space on the baseplate, it's almost like they were made with stationary freestyle combos in mind.

Throw them on any freestyle deck between 7.25" and 7.4" wide and you're bound to have a great time. We recommend coupling these with a deck such as the Moonshine Kill Your Idols and the freestyle wheels of your choice.

The Seismic Focus is the most high-tech freestyle wheel ever made. Featuring Seismic's signature urethane compounds and precision hub, this is the wheel you want when speed and resilience is paramount.

Couple them with the 7-ball Tekton XT bearings for the best possible ride.

Synopsis are a bearing brand from Los Angeles that have been making a bit of a buzz on the internet for a while, and we're proud to be the first to stock them in the UK.

These are their standard "Blue Rays" bearings - effectively a Bones Reds equivalent in terms of performance. If you're just looking for a good, sturdy bearing without breaking the bank, these are a good choice.

However, where they really shine is what comes in the box. Every pack of Synopsis Blue Rays bearings includes replacement axle nuts1, a full pack of eight speed washers, bearing spacers (which you really should use!) and, most importantly, a little bottle of bearing lubricant. No matter how thrashed your setup, these will get you rolling smoothly again - and keep you rolling smoothly for a long time.

1: We highly recommend you use an axle rethreader to clean up your axle ends before replacing damaged axle nuts; a heavily damaged axle is just going to strip and ruin the new nuts.

These are Khiro‘s standard 1″ Phillips head bolts. No fuss, no muss. If you’re using thin risers, a thicker deck than usual or trucks with a thicker baseplate, this is the length you want.

However, if you’re combining any of those two things, definitely jump up a size; 1″ won’t cut it.

After the success of their first skid plates, Seismic decided to make some new shapes out of the same high-grade proprietary compound. Like the original skids, these last longer and are slightly grippier than regular skid plate material - only now you can use them on directional and single kick boards.

They also keep Seismic's curve along the bottom edge of the skid, giving you something a little extra to lock onto for caspers, a better point to grab for airwalks and fingerflips, and reducing the overall weight by 5g compared to other skids of a similar shape and size. Each one comes with the necessary hardware to mount it to a deck, but you will need a drill to put them on.

This particular shape works well on the nose of the Turi Zoltan deck from Cirus, the Denham Hill, Nick Beaulieu, and Kill Your Idols boards from Moonshine, the Deco and Mike Rogers decks from Mode Skateboards, and the nose of most typical 1980s reissues like the Mullen Chessboard. All of those decks will need a different skid for the other end of the deck, however.

It's also useable on both ends of the Toshiaki Fujii deck from Moonshine, so make sure you pick up two of these if you're planning on using this skid for that deck.

(Don't know how to fit skid plates? Look in the description below for a handy installation guide.)

After the success of their first skid plates, Seismic decided to make some new shapes out of the same high-grade proprietary compound. Like the original skids, these last longer and are slightly grippier than regular skid plate material - only now you can use them on directional and single kick boards.

They also keep Seismic's curve along the bottom edge of the skid, giving you something a little extra to lock onto for caspers, a better point to grab for airwalks and fingerflips, and reducing the overall weight by 5g compared to other skids of a similar shape and size. Each one comes with the necessary hardware to mount it to a deck, but you will need a drill to put them on.

This is a much longer, squarer shape, and works well on the tail of the Turi Zoltan deck from Cirus, the Denham Hill and Kill Your Idols boards from Moonshine, the Deco and Mike Rogers decks from Mode Skateboards, and the tail of most typical 1980s reissues like the Mullen Chessboard. All of those decks will need a different skid for the other end of the deck, however.

(Don't know how to fit skid plates? Look in the description below for a handy installation guide.)

A sheet of Mob griptape, installed onto the deck of your choice by one of our skilled Griptape Technicians here at Offset HQ.