Khiro 2.5″ Kingpin Set

£4.70

Khiro 2.5″ Kingpin Set

£4.70

For some reason, sourcing replacement kingpins is more difficult these days than it used to be. We already carry sets of 2″ long kingpins, but now we have these longer 2.5″ kingpins for RKPs and taller trucks. One pack of these 2.5″ Khiro kingpins is enough to fix up two trucks – so you’ve got one to replace the kingpin you just snapped in two and another one to keep as a spare.

However, note that these kingpins rely on a proper hex slot in the baseplate – which a lot of modern trucks don’t have. Check the chart below to see the trucks we’ve checked these will work with. If your truck takes a splined kingpin, we have a replacement for that, too.

In stock

SKU: KHIRO-KINGPIN-25 Categories: , Tags: , , , Product Brand: Khiro

Compatibility chart

We’ve looked at every truck we have lying around and checked to see if this kingpin set would fit. If you have a truck which isn’t on this chart and want to know if you can use these, get in touch and we’ll figure it out together.

However, note that these 2.5″ kingpins are longer than the standard size – only swap to these if you want or need that extra 0.5″ for some reason, otherwise you’re probably better off with the 2″ version for most trucks.

Truck brand Model Compatible? Notes
Ace All trucks No The space around the kingpin is slightly too big to hold the hexhead in place.
Film All trucks Yes A perfect fit – only longer, so will stick out past the hangar.
Gullwing Mission I Possibly It looks like it should work, but we don’t have stock to check!
Gullwing Pro III Yes A perfect fit – only longer, so will stick out past the hangar.
Gullwing Shadow DLX Yes Works perfectly.
Independent All trucks No Independent widened the hole in the baseplate specifically to stop hex head kingpins from being used in Stage 9. Older trucks will take them, but modern ones won’t.
Paris Street Trucks No There’s nothing to hold the kingpin head in place.
Paris RKPs (V2 or V3) Yes These should be a direct replacement, but check the length of the stock kingpin, just in case.
Sure-Grip Invader 700 No There’s nothing to hold the kingpin head in place.
Tracker All trucks Yes As far as we know, all Tracker trucks can still take hex head kingpins.

Additional information

Weight 90 g
Dimensions 13 × 9 × 2.5 cm
Brand

Suggested Use

, , ,

Length

2.5"

Reviews

There are no reviews yet.

Be the first to review “Khiro 2.5″ Kingpin Set”

Your email address will not be published. Required fields are marked *