Unsurprisingly, this new FILM x Death Skateboards collaboration truck is very similar to the regular 6.0″ FILM trucks. But, in the interest of completeness and providing all the data you need, here’s all the measurements for these, blatantly copied and pasted from the other page:

We’ve measured the FILM 6.0 up, and we get a real-world hanger measurement of 153mm, an axle of 8.75″, and a height to the center of the axle of about 55mm with the stock bushings, with a weight (including all supplied nuts and washers) of 370g per truck.

The bottom bushing measures 14mm, and the top one is 10.3mm – with a specially-shaped extension to fit around the kingpin in the hanger to hold the hanger central and reduce slop. The provided bushings measure 88a on our durometer, and should be fine for most skaters out of the box.

Finally, the pre-installed kingpins are of the modern splined variety, but there is a space in the baseplate for a hexhead; we can’t guarantee a traditional or inverted kingpin would be held without wobble until we try it ourselves, but at least on paper, it should work.