FILM Flying Fish Trucks


Out of stock

FILM Flying Fish Trucks


Note: this particular colourway from Film has been discontinued. You can have a look at our current selection of Film trucks by clicking here.

Originally Cliché Skateboards’ sister company, FILM are producing high-quality and well-designed trucks at an insanely low cost. These are the “Flying Fish” trucks, with art by Magenta’s Soy Panday. FILM also produce regular RAW trucks if you want a more classic look.

There’s a lot to love on FILM’s trucks; stock bushings which slot into the hangar, holding it still around the kingpin; a baseplate which can still use traditional hex-head kingpins and still has the old-school mounting ; faced hangar ends to ensure the bearings can spin properly; and, of course, solid construction and a great turn.

Don’t know what size you need? Let our handy measurement guide give you all the info you could ever want.

SKU: FILMFLYINGFISH Category: Tags: , , , , , , , , , Product Brand: FILM
(Note that all the following measurements for the FILM Flying Fish trucks have been taken by ourselves, not just copied from a manufacturer’s website. We don’t trust those measurements either.)

Size Hangar Axle Height Weight To fit
5.25 137mm 8″ 55mm 335g 7.75″-8.25″
5.5 144mm 8.25″ 54mm 355g 8″-8.5″

The bottom bushing measures 12mm, and the top one is 8.5mm – with a specially-shaped extension to fit around the kingpin in the hanger to hold the hanger central and reduce slop. The provided bushings measure 88a on our durometer, and should be fine for most skaters out of the box.

Finally, the pre-installed kingpins are of the modern splined variety, but there is a space in the baseplate for a hexhead; we can’t guarantee a traditional or inverted kingpin would be held without wobble until we try it ourselves, but at least on paper, it should work.

Additional information

Weight N/A
Dimensions 8 × 6 cm



5.25, 5.5

Suggested Use



There are no reviews yet.

Be the first to review “FILM Flying Fish Trucks”

Your email address will not be published. Required fields are marked *