FILM 5.0 RAW Trucks

£40

FILM 5.0 RAW Trucks

£40

Originally Cliché Skateboards’ sister company, FILM are producing high-quality and well-designed trucks at an insanely low cost. These are the classic “raw” trucks; FILM also produce a range of graphic trucks for the more fashion-conscious skater.

There’s a lot to love on FILM’s trucks; stock bushings which slot into the hangar, holding it still around the kingpin; a baseplate which can still use traditional hex-head kingpins; faced hangar ends to ensure the bearings can spin properly; and, of course, solid construction and a great turn.

The FILM 5.0 trucks are a perfect match for decks between 7.5″ and 7.825″ wide; these were your standard truck size in the early 2000s, so if you’re looking to work on your technical flatground or ledge game, grab these, some tiny wheels and a suitably skinny deck.

Only 1 left in stock

SKU: FILMRAW126 Category: Tags: , , , , , , Product Brand: FILM

We’ve measured the FILM 5.0 up, and we get a real-world hanger measurement of 126mm, an axle of 7.6″, and a height to the center of the axle of about 51mm with the stock bushings, with a weight (including all supplied nuts and washers) of 350g per truck – making these trucks lighter than Independent’s standard 129.

The bottom bushing measures 14mm, and the top one is 10.3mm – with a specially-shaped extension to fit around the kingpin in the hanger to hold the hanger central and reduce slop. The provided bushings measure 88a on our durometer, and should be fine for most skaters out of the box.

Finally, the pre-installed kingpins are of the modern splined variety, but there is a space in the baseplate for a hexhead; we can’t guarantee a traditional or inverted kingpin would be held without wobble until we try it ourselves, but at least on paper, it should work.

Additional information

Weight 650 g
Dimensions 19.3 × 8 × 6 cm
Brand

Size

129mm, 5.0

Suggested Use

,

Reviews

There are no reviews yet.

Be the first to review “FILM 5.0 RAW Trucks”

Your email address will not be published. Required fields are marked *