Brand-X X-Terminator 10″


Out of stock

Brand-X X-Terminator 10″


We don’t generally bother with reissues, but Brand-X is doing them properly; original moulds, high-quality wood and properly hand-screened decks mean these are as close as you’ll get to the decks people were skating in the 1980s.

The X-Terminator is a proper early 80s pig shape, with a tiny (and flat!) nose, the smallest hint of concave at the edges, and all four wheel wells present and correct. If you were looking for the most old-school of setups for bowl riding, this is a good starting point. And, for a bonus note, this deck is drilled with both new-school and old-school truck mounting patterns, so you can even bolt your OG Indys or Trackers on it without modification!

Check the description below for details on the width of the deck at the truck holes so you can figure out how best to set up this shaped deck.


Length: 29.125″
Width: 10″
Wheelbase: 16.1875″
Nose: 2.5″
Tail: 6.125″
Kicktail angle: 19º

Note 1: nose and tail measurements are given to the “new school” mounting holes for easier comparison with other decks.

Note 2: Kicktail angle is measured at the very tip of the kicktail; this deck has a very large radius to the kicktail which means it feels a lot mellower than that measurement suggests.

Out of stock

SKU: BRANDX-XTERMINATOR Categories: , Tags: , , , , , , , , , , , Product Brand: Brand-X

Choosing trucks for a shaped deck isn’t as simple as with a “normal” straight-sided popsicle. The widest point of this X-Terminator deck from Brand-X is 10″, but it’s just 8″ wide at the front truck and 9.25″ at the back. And yes, we re-checked those measurements multiple times, and 8″ isn’t a typo.

As a result, almost any truck that supports the full width of the deck will stick out at the front – that’s pretty much par for the course for early 80s “pig” decks, though. As such, we’d choose something like the classic Ace 66 with a 9.33″ axle to roughly match the width at the back – although you could go a bit more period-correct with the 9″ Gullwing Pro IIIs if you also had some wheels which were deep enough

Additional information

Weight 1450 g
Dimensions 73.98 × 25.4 × 5.5 cm






Suggested Use



There are no reviews yet.

Be the first to review “Brand-X X-Terminator 10″”

Your email address will not be published. Required fields are marked *