Ace 11 Trucks

£56

Ace 11 Pair
Ace 11 Kingpin
Ace 11 Left
Ace 11 Right
Ace 11 Top
Ace 11 Baseplate

Ace 11 Trucks

£56

Ace trucks have been something of an open secret for a while; based on the much-loved Stage V Independent geometry, a lot of guys have been putting aside their life-long Iron Cross obsessions to make the switch to Ace and have never looked back. Why? Solid metal, longer-lasting hangers, and a beautiful carve while still stable at speed.

These are the Ace 11, suitable for freestyle and early 2000s style technical street skating. With a 7.25″ axle, the Ace 11 is a perfect match for decks around 7.5″ or 7.6″ wide like the Toshiaki Fujii “Ryu” or the single kick Dan Garb “Stinger”.

Only 2 left in stock

SKU: ACE11 Category: Tags: , , , Product Brand: ACE

We’ve measured the Ace 11 up, and we get a real-world hanger measurement of 116mm, an axle of 184mm/7.25″, and a height to the center of the axle of about 52mm with the stock bushings, with a weight (including all supplied nuts and washers) of 340g per truck.

The bottom bushing measures 13mm, and the top one is 11.5mm. The provided bushings measure 85a on our durometer, and should be fine for most skaters out of the box. However, if you’re planning on using these trucks for freestyle, you’ll want to upgrade to harder bushings. Note that FILM’s bushings won’t fit without modification, as Ace’s hangars have much less metal between the bushings than most trucks, meaning there’s not enough space for the “jaw system” of the FILM bushings.

Finally, the pre-installed kingpins are of the modern splined variety, and like most modern trucks, the baseplate has just been hollowed out enough to prevent you fitting an old-style hex head or inverted kingpin.

Additional information

Weight 680 g
Dimensions 18.5 × 8 × 6.5 cm
Brand

Size

116mm

Suggested Use

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.